we found that it is much better to put the cover on loose. Step 3 Rain water may gather on the surface of your cover. You can do this by simply removing the net and shaking it out. A leaf net will also prevent excess weight from building up on the cover due to leaves that have gotten wet in the rain. Remove snow and ice from your pool regularly. Secure the pool cover along the edges of the cover onto the pool so no debris, snow, rain, or ice gets into the pool water. Drape your usual cover on top of your pool, making sure that the pillow stays in the center. Carefully place your pump upright on the pool cover and use a long-handled squeegee or push broom to slide the pump into position. This way your pump will stay submerged longer and remove the most water. Step 3: Placing Your Pump A s you place your pump on the pool cover, you want it to be submerged in the deepest spot. Your vinyl liner can dry out, shortening its life considerably. Important: Never drain an above ground pool completely when winterizing. You'll need to keep draining water off the cover with a pump or siphon to protect it from damage. Keeping the water level at its normal level is better for your winter cover. Wall bags help prevent this.Keeping the water level at its normal level is better for your winter cover. Still, wind can get under them and lift them. Most above-ground pool covers overlap the edge of the pool. For most pools, you'll need several air pillows strategically placed to provide adequate support for the cover. we have 12 clamps on it.hope this helps These float on your pool's water and hold the cover out of the water. then use big clamps to keep it from blowing off.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |